Controlled-products-systems-group 212ILMBZ Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel Controlled-products-systems-group 212ILMBZ herunter. Controlled Products Systems Group 212ILMBZ User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 17
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
6051344 Rev. 1.0
Page 1 of 17
212iLM Mullion (ILLUMINATED WEATHER RESISTANT) Keypad
Stand Alone Keypad-Installation Manual
Features:
v 120 User Capability
v Illuminated Hardened Keys
v Programmable 00-99 Second Relay Activation Time
v Remote Trigger Input (REX)
v Bell output (timed or continuous)
v Designed for Heavy Traffic Application (greater than 1 million cycles)
v Surface Mount
v Indoor / outdoor Applications
v Fully encapsulated
Installation:
q Section 1: Unpacking and checking the packing list
q Section 2: Mounting the 212iLM Mullion
q Section 3: Wiring the 212iLM Mullion
q Section 4: Power Up and System Defaults
q Section 5: Programming the 212iLM Mullion
q Section 6: Trouble Shooting
International Electronics, Inc.
427 Turnpike Street
Canton, Massachusetts 02021
Seitenansicht 0
1 2 3 4 5 6 ... 16 17

Inhaltsverzeichnis

Seite 1 - Installation:

6051344 Rev. 1.0Page 1 of 17212iLM Mullion (ILLUMINATED WEATHER RESISTANT) KeypadStand Alone Keypad-Installation ManualFeatures:v 120 User Cap

Seite 2 - Section 3: Wiring

6051344 Rev. 1.0Page 10 of 17Step 5: Changing the 212iLM Mullion Feedback Options.The 212iLM Mullion has two keypress feedback options that you m

Seite 3

6051344 Rev. 1.0Page 11 of 17Step 7: Doorbell Option:When the doorbell feature is enabled there will be visual and audio keypress feedback for th

Seite 4

6051344 Rev. 1.0Page 12 of 17To enable/disable keypad dimming:If keypad dimming option is set to zero, then the keypad will maintain full illumin

Seite 5

6051344 Rev. 1.0Page 13 of 17Programming Options ChartIf the pre-programmed default values must be changed or additional functions are desired, t

Seite 6 - Wiring the Bell Button:

6051344 Rev. 1.0Page 14 of 17Section 6: Trouble Shooting.Refer to this section if the 212iLM Mullion is not responding correctly to the operation

Seite 7 - System Defaults:

6051344 Rev. 1.0Page 15 of 17International Electronics Incorporated (IEI) warrants its products to be freefrom defects in material and workmanshi

Seite 8

6051344 Rev. 1.0Page 16 of 17NOTES: IEI suggests that you make a record of your installation for future reference.

Seite 9

6051344 Rev. 1.0Page 17 of 171 7/16”1 7/16”3 3/8”6 1/4”Diameter of the mounting holes is: 11/64Diameter of the wiring holes is: 7/8Thi

Seite 10

6051344 Rev. 1.0Page 2 of 17q Section 1: Unpacking and checking the packing listOpen the box, and inside you will find:Keypad: (1) 212iLM

Seite 11

6051344 Rev. 1.0Page 3 of 171. Attach the 8-conductor wire harness to the plug in connector on the back of the 212iLM Mullion.2. Next you will

Seite 12

6051344 Rev. 1.0Page 4 of 17Example of Wiring to a Electro-Magnetic Lock Using a SEPARATE Power Supply:Wiring to an Electric Strike: (see below)T

Seite 13 - Programming Options Chart

6051344 Rev. 1.0Page 5 of 17Situation 2:If you are using a separate power supply with the 212iLM Mullion and the Electric Strike, you need to run

Seite 14 - Section 6: Trouble Shooting

6051344 Rev. 1.0Page 6 of 17Wiring to a Request to Exit (Push to release):The 212iLM Mullion keypad may be wired to accept an input from a remot

Seite 15 - ELECTRONICS, INC

6051344 Rev. 1.0Page 7 of 17Example of wiring to a Bell or Speaker:q Section 4: Power UpMaking the Power Connections: (The 212iLM Mullion is po

Seite 16 - Page 16 of 17

6051344 Rev. 1.0Page 8 of 17q Section 5: Programming the 212iLM MullionThe 212iLM Mullion supports 120 user codes that will energize the main r

Seite 17

6051344 Rev. 1.0Page 9 of 17Step 3: Adding or Changing User Codes.User codes may be 1 to 6 digits in length. The 212iLM Mullion has to be in pro

Kommentare zu diesen Handbüchern

Keine Kommentare