Programming
Program the Master Code: The master code is the four-digit number required to gain access to the
receiver memory for all programming. You MUST program a MASTER CODE first.
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
1st Digit 2nd Digit 3rd Digit 4th Digit
Write Down Your Master Code
? ? ? ?
any four numbers
then press
“BEEP”
2. Choose and enter four-digits on the keypad
1. Press Master Code Button
Important Note: Keep this instruction sheet for future reference after writing down the master
code . There is NO way of retrieving the master code after it has been programmed in. If you
forget it, you will have to program in a new master code but all other previously programmed
information will remain intact.
Facility Codes: Unique code for transmitter and located on back of transmitter (Fc).
1. Press and the four-digit Master Code.
2. Press for the FIRST facility code.
3. Enter the two-digit facility code (01-10), then press
4. Repeat steps 2 and 3 to enter additional facility codes.
5. Press TOGETHER to end programming.
1 4
“BEEP”
“BEEP”
“BEEP”
“BEEEEEEEEEP”
1
0
Note: Be sure to increment this number each time another facility code
is entered - up to 10, use 0 for facility code 10 if required.
Transmitter Button Number: Used to identify the individual transmitter button that will activate the receiver (Up to 3 buttons).
1. Press and the four-digit Master Code.
3. Enter the button number that the receiver is to respond to (1-2-3), then press
5. Press TOGETHER to end programming.
3 2
“BEEP”
“BEEP”
“BEEEEEEEEEP”
0
Relay Strike Time: The amount of time the receiver relay activates.
1. Press and the four-digit Master Code.
2. Enter a two-digit number (00-99) for the relay activation in seconds, then press
3. Press TOGETHER to end programming.
0 3
“BEEP”
“BEEP”
“BEEEEEEEEEP”
0
Note: 00 programs the relay for 1/2 second.
01 programs the relay for 1 second etc.
Note: Receivers manufactured before Rev E (2/01) require
the receiver case to be opened to access the master code
button. All other programming steps remain the same for
the receivers.
8
7
0
*
9
#
2
1
3
5
4
6
Master Code Button
1
2
3
4
5
6
7
8
Keypad
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern